Safety KPIs

Seat Belt

Total Seat Belt Violations

Total number of times seat belts weren’t worn while the site’s assets [on Safety (Site)] or single asset [on Safety (Asset)] were in working state* for the selected date range.

* Refers to seat belt being unfastened while working state is more than five minutes.

Runtime

Refer to Runtime to know more.

Seat Belt Violations/Hour

Total number of times seat belts weren’t worn* across all asset(s) [on Safety (Site)] or for the asset [on Safety (Asset)] ÷ Total number of site/asset operational hours for the selected date range.

* Refers to adjusted seat belt violations.

Seat Belt Compliance

(For a single-day selection) Summarizes seat belt performance for the site’s operational asset(s) [on Safety (Site)] or for the asset [on Safety (Asset)]. If there’s a violation reported, the compliance is 0%. If there are no violations reported, the compliance is 100%.

(For a multi-day selection) It is calculated as follows:

• [For Safety (Site)] Weighted average of the above calculation = [Total sum of (each day's compliance rate * each day's total operational assets)] ÷ (Sum of each day's total operational assets).

• [For Safety (Asset)] Weighted average of the above calculation = (Sum of each day’s compliance rate) ÷ (Total number of operational days within the selected date range)

Detect

Total Detections

Sum of warning and motion inhibit counts for the selected date range.

Warning

Total number of critical or red-zone warnings received on the asset’s travel path for the selected date range.

Motion Inhibit

Total number of times the site’s assets’ [on Safety (Site)] or asset’s [on Safety (Asset)] movement was prevented from a stopped state due to a detection on the asset’s travel path for the selected date range.

Total number of times the site’s assets’ [on Safety (Site)] or asset’s [on Safety (Asset)] movement was slowed down due to a detection of obstacle(s) on the travel path for the selected date range.