Safety (Site) KPIs
| KPI | Parameter | Description |
Seat Belt |
Total number of times seat belts weren’t worn while the site’s assets [on Safety (Site)] were in working state* for the selected date range. * Refers to seat belt being unfastened while working state is more than five minutes. |
|
|
Refer to Runtime to know more. |
||
|
Total number of times seat belts weren’t worn* across all site's assets ÷ Total number of site operational hours for the selected date range. * Refers to adjusted seat belt violations. |
||
|
(For a single-day selection) Summarizes seat belt performance for the site’s operational assets. If there’s a violation reported, the compliance is 0%. If there are no violations reported, the compliance is 100%. (For a multi-day selection) Weighted average of the above calculation = [Total sum of (each day's compliance rate * each day's total operational assets)] ÷ (Sum of each day's total operational assets). |
||
Detect |
Sum of reported warning, motion inhibit and mitigation counts for the selected date range. |
|
|
Total number of times an asset detected a critical zone collision potential for the selected date range. |
||
|
Total number of times a stationary asset was prevented from reversing for the selected date range. |
||
|
Total number of times an asset was stopped in the reverse direction for the selected date range. |