Safety (Asset) KPIs

KPI Parameter Description

Seat Belt

Total Seat Belt Violations

Total number of times seat belts weren’t worn while the site’s single asset [on Safety (Asset)] was in working state* for the selected date range.

* Refers to seat belt being unfastened while working state is more than five minutes.

Runtime

Refer to Runtime to know more.

Seat Belt Violations/Hour

Total number of times seat belts weren’t worn* for the asset ÷ Total number of asset operational hours for the selected date range.

* Refers to adjusted seat belt violations.

Seat Belt Compliance

(For a single-day selection) Summarizes seat belt performance for the site’s operational asset. If there’s a violation reported, the compliance is 0%. If there are no violations reported, the compliance is 100%.

(For a multi-day selection) Weighted average of the above calculation = [Total sum of (each day's compliance rate * each day's total operational assets)] ÷ (Sum of each day's total operational assets).

Detect

Total Detections

Sum of reported warning, motion inhibit and mitigation counts for the selected date range.

Warning

Total number of times an asset detected a critical zone collision potential for the selected date range.

Motion Inhibit

Total number of times a stationary asset was prevented from reversing for the selected date range.

Mitigation

Total number of times an asset was stopped in the reverse direction for the selected date range.